Ir directamente a la información del producto
1 de 4

Fender

1990 Fender '65 Twin Reverb Reissue

Precio habitual
€1.350,00 EUR
Precio habitual
Precio de venta
€1.350,00 EUR

1990 Fender '65 Twin Reverb Reissue in good condition. Great for a gigging country, blues, surf guitarist or anyone looking for great clean tones with lots of headroom. This is a 2×12 combo with 85 watts, all tube, dual 12" speakers. USA made and sounds great! Comes with the original Fender footswitch.

During the blackface era of Fender amplifiers from 1963 to 1967, the amps had black faceplates, black tolex covering on the cabinet, and neutral to slightly amber tinted silver sparkle grill cloth with a small ribbed rectangular pattern. The Twin now had an onboard spring reverb tank and was renamed the Twin Reverb. The Fender Twin Reverb is considered a standard model for players seeking a clean sound, and it is especially known for the quality of its built-in spring reverb.

During this time the amplifier's output was rated at 85 watts into a 4-ohm speaker load. The circuit used is commonly known as the AB763 circuit. Fender Twin Reverb amplifiers use four output tubes, of the 6L6GC type. They used six preamp tubes, consisting of four 7025/12AX7 types and two 12AT7 types. All Twin Reverbs feature a solid-state rectifier.

The Fender Twin Reverb has two independent channels, labeled Normal and Vibrato. The controls have black-skirted knobs numbered from 1 to 10. The Normal channel has two inputs, a "bright" switch (which compensates for loss of brightness through the volume control when the control is set lower than about "6" on its 1-10 scale), a volume control, treble, middle and bass tone controls. The Vibrato channel has a duplication of the same controls as the normal channel, plus the addition of reverb, vibrato speed and intensity controls. Reverb is accomplished with a tube/transformer driven low impedance spring reverb tank (made by the Hammond company) or its spin-off company Accutronics. The addition of the reverb circuit requires an additional "gain" stage in the preamp, and as such, the Vibrato channel is capable of a bit more distortion when the volume is set high.

The front panel also has a bright red pilot light lens (better known as "pilot lamp jewel" for its multiple triangular-shaped facets), covering the pilot light.

Twin Reverb amplifiers came standard with "tilt back legs" which allowed the amplifier to be tilted at an angle backwards, so the speakers faced at a more upward angle, promoting better distribution of their output to an audience when placed on a low stage.